Table of Contents
Advertisement
Universal Temperature Converter KCD2-UT2-(Ex)1
Overview
Further information (e. g. certificates, the data sheets for the UT2 devices and the operating
instructions for the K-System) can be found on our Internet page www.pepperl-fuchs.com/pa
(under product search, enter *UT2*).
2.2
Versions
The following versions of the temperature transmitter are available:
KCD2-UT2- ** *
The temperature converters KCD2-
UT2-(Ex)1 of the K-System (referred to
as UT2) are used for temperature
measurement.
Resistance temperature detectors,
thermocouples, potentiometers or
voltage sources can be connected to
the inputs of the converter.
The device converts the input signals
into proportional current signals or
voltage signals.
The output signals can, for example, be
forwarded to displays or analog inputs
of the process control system.
1 = 1 input, 1 output
Ex = for connection of field devices in areas exposed to
danger of explosion
without identifier letters = for connection of field devices in
the safe area
EN
EN - 3
Advertisement
Table of Contents
