Symbols Used In This Document; Overview; Application - Pepperl+Fuchs KCD2-UT2-1 Manual

Universal Temperature Converter KCD2-UT2-(Ex)1

Symbols used in this document

1 Symbols used in this document
EN
Warning
Attention
Note
2

Overview

2.1

Application

The devices of the K-System from Pepperl+Fuchs are used to transmit signals between field
devices and the process control system or control.
Devices with the "Ex" code in their type identifiers are suitable for connection to field devices in
the hazardous area. The field current circuits of these devices are intrinsically safe and are
galvanically isolated from the not intrinsically safe circuits. The devices thus represent an
electrical isolation between the hazardous area and the safe area within a system.
Devices without an "Ex" code can be used for signal transmission between field devices in the
safe area and the process control system or the control.
2 - EN
This symbol indicates a warning about a possible danger.
Failure to observe this warning may result in personal injury or death, or property
damage or destruction.
This symbol warns of a possible fault.
If the instruction given in this warning is not heeded, the device and any systems or
plants connected to it could develop a fault or even fail completely.
This symbol brings important information to your attention.