Program The Water Softener -- Model Whes30; Set Time Of Day - Whirlpool WHES20 Installation And Operation Manual

SET SALT LEVEL button
SET
SALT
LEVEL
CHECK
SALT
LEVEL
RECHARGE button

Set Time of Day

Program the Water Softener -- Model WHES30

Display
PRESS TO SCHEDULE
HOLD TO START
RECHARGE
PROGRAM button
Figure 11
If you have questions about installation, programming, operating and routine maintenance...
call 1- - 866- - 986- - 3223, Monday - - Friday, 8 am to 9 pm, EST.
When the transformer is plugged into the electrical outlet, a model code and a test number (example:
s3.0), begin to flash in the faceplate display. Then, 12:00 PM and the words "CURRENT TIME" begin
to flash.
NOTE: If - - - - - - - - shows in the display, press the UP
shows in the display. Then, press the
flashing CURRENT TIME display.
If the words "CURRENT TIME" do not show in the display, press the
they do.
+
1. Press the Up or
sets the time back.
Be sure AM or PM is correct.
Press buttons and quickly release to slowly advance the display. Hold for fast
NOTE:
advance. This procedure applies for all following settings.
UP button
+
PROGRAM
−
DOWN Button
−
Down buttons to set the present time. Up moves the display ahead; down
−
+
or DOWN button until LE31
PROGRAM button to set, and change to the
PROGRAM button until
19