Display
Set Time of Day
16
Program the Water Softener
Figure 11
If you have questions about installation, programming, operating and routine maintenance...
call 1- - 866- - 986- - 3223, Monday - - Friday, 8 am to 9 pm, EST.
When the water softener is plugged in, a model code and a test number (example: U3.0), will flash in
the faceplate display. Then the words "PRESENT TIME" will show in the display along with a flashing
"12:00 AM".
NOTE:
If "A - - - - - - " shows in the display, press the UP
"L 45" shows in the display. Then, press the
the display will change to the flashing "PRESENT TIME" display.
If the words "PRESENT TIME" do not show in the display, press the
they do.
1. Press the
Up or
sets the time back.
PRESENT TIME
Be sure AM or PM is correct.
NOTE:
Press buttons and quickly release to slowly advance the display. Hold the buttons
down for fast advance. This procedure applies for all following settings.
RECHARGE button
Down buttons to set the present time. Up sets the display ahead; down
PM
UP button
PROGRAM button
DOWN Button
DATA Button
or DOWN
buttons until
PROGRAM button to set, and
PROGRAM button until
AM
PRESENT TIME