Program The Water Softener -- Model Whes20; Set Time Of Day - Whirlpool WHES20 Installation And Operation Manual

RECHARGE button

Set Time of Day

Program the Water Softener -- Model WHES20

Display
PRESS TO SCHEDULE
HOLD TO START
RECHARGE
PROGRAM button
Figure 10
If you have questions about installation, programming, operating and routine maintenance...
call 1- - 866- - 986- - 3223, Monday - - Friday, 8 am to 9 pm, EST.
When the transformer is plugged into the electrical outlet, a model code and a test number (example:
s3.0), begin to flash in the faceplate display. Then, 12:00 PM and the words "PRESENT TIME" begin
to flash.
NOTE: If - - - - - - - - shows in the display, press the UP
shows in the display. Then, press the
flashing "PRESENT TIME" display.
If the words "PRESENT TIME" do not show in the display, press the
do.
+
1. Press the Up or
sets the time back.
PRESENT TIME
Be sure AM or PM is correct.
NOTE: Press buttons and quickly release to slowly advance the display. Hold the buttons
down for fast advance. This procedure applies for all following settings.
UP button
+
−
PROGRAM
DOWN Button
−
Down buttons to set the present time. Up moves the display ahead; down
PM
−
+
or DOWN button until LE20
PROGRAM button to set, and change to the
PROGRAM button until they
AM
PRESENT TIME
17