Schedule And Standby - McCulloch ROB S400 Operator's Manual

4. The product shuts down.
5. Check that the indicator lamp on the keypad
is not lit.

4.7 Schedule and Standby

The product has an inbuilt standby period
according to the Standby time table. The standby
period provides for instance a good opportunity to
water or play games on the lawn.
Model
2
600 m
2
500 m
2
400 m
4.7.1 Example 1
This example is applicable to products with a
specified work area of 500 m
the same for the other models.
Schedule setting, Period 1: 08:00 - 22:00.
Active period (A): 08:00 - 20:00.
The schedule settings ensure that the product
begins cutting the lawn at 08:00. At 20:00 the
product has reached the maximum available
operating hours and is therefore parked in
standby mode. The product starts cutting the
grass again next day at 08:00.
32 - Operation
Standby time, mini-
mum hours per day
10
12
14
2
, but the principle is
Example: A specified work area of 500 m
Operation, A = max. hours
Charging/Standby, B = min. hours
4.7.2 Example 2
This example is applicable to products with a
specified work area of 500 m
the same for the other models.
Schedule setting Period 1 (A): 08:00 - 17:00.
Schedule setting Period 2 (C): 20:00 - 24:00.
Active period (A): 08:00 - 17:00
Active period (C): 20:00 - 23:00.
The product operates between 08:00 and 17:00.
It starts again at 20:00 but at 23:00 the product
has reached the maximum available operating
hours and is therefore parked in standby mode.
The product starts cutting the grass again next
day at 08:00.
2
12
12
2
, but the principle is
1411 - 001 - 18.12.2019