Maintenance; Maintenance Schedule - McCulloch M125-97FH Workshop Manual

Maintenance Schedule

The following is a list of maintenance procedures that must be performed on the ride-on mower. For points not described in this
workshop manual, refer to the operator's manual.

Maintenance

Cleaning
Check engine oil level
Check the engine cooling air intake
Check the steering wires
Check the brakes
Check the battery
Lubricate the drive chain, M105-97F
Check the safety system
Check nuts and screws
Check for fuel and oil leakages
Clean around the muffler
Change engine oil )
1
Change the air filter )
2
Check the cutting deck
Check the air pressure in the tires
Lubricate joints and shafts
3
Check the V-belts
Check and adjust the throttle cable
Change the fuel filter
Change the spark plug
Check the fuel hose. Change if necessary
First change after 8 hours. When operating with a heavy load or at high ambient temperatures, change every 25 hours.
1)
Maintenance and changes are required more often in dusty conditions.
when used on a daily basis.
4)
l
= Described in this workshop manual
m
= Not described in this workshop manual
t
= Described in the operator's manual
WARNING! Service procedures must not be conducted on
the engine or cutting deck unless:
The engine has been stopped.
The ignition key has been removed.
The ignition cable has been removed from the spark plug.
The parking brake is engaged.
The cutting deck is disengaged.
MAINTENANCE
)
)
4
Performed by an authorized servicing dealer.
Daily maintenance At least once
before starting a year
t
t
t
l
l
t
t
l
m
m
m
The ride-on mower should be lubricated twice a week
3)
Maintenance interval in hours
25 50
l l
t
t
t
t
l
l
m
100 200
m
t
2)
– 5
English