McCulloch ROB S400 Operator's Manual page 12

Hide thumbs Also See for ROB S400:
Table of Contents

Advertisement

CAUTION: Do not lift the product when
it is parked in the charging station. It
can damage the charging station
and/or the product. Push STOP and
pull the product out of the charging
station before lifting it.
To safely move from or within the work area:
1.
Push the STOP button to stop the product.
2.
Push the ON/OFF button for 3 seconds and
make sure the product is switched off.
Check that the indicator lamp on the keypad
is not lit. This means that the product is
The indicator lamp on
disabled. Refer to
page 30 .
3.
Carry the product by the handle with the
blade disc away from the body.
12 - Safety
2.3.4 Maintenance
WARNING: The product must be
switched off before any maintenance is
done. The product is disabled when
the indicator lamp on the keypad is not
lit.
WARNING: Use the plug to disconnect
the charging station before any
cleaning or maintenance of the
charging station or the loop wire.
CAUTION: Never use a high-pressure
washer to clean the product. Never
use solvents for cleaning.
Inspect the product weekly and replace any
damaged or worn parts. Refer to
page 34 .
2.3.5 In the event of a thunderstorm
To reduce the risk of damage to electrical
components in the product and the charging
Maintenance on
1411 - 001 - 18.12.2019

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rob s500Rob s600967798025967798103967798003

Table of Contents