Symbols On The Product; Symbols On The Display; Symbols On The Battery; General Manual Instructions - McCulloch ROB S400 Operator's Manual

1.3 Symbols on the product

These symbols can be found on the product.
Study them carefully.
WARNING: Read the
user instructions before
operating the product.
WARNING: Disable the
product before working on
or lifting the product.
WARNING: Keep a safe
distance from the product
when operating. Keep
your hands and feet away
from the rotating blades.
WARNING: Do not ride
on the product. Never put
your hands or feet close
to or under the product.
Use a detachable power
supply as defined on the
rating label next to the
symbol.
This product conforms to
the applicable EC Direc-
tives.
Noise emission to surroundings. The
product's emissions are set out in
Technical data on page 50 and on the
rating plate.
It is not permitted to dispose this
product as normal household waste.
Ensure that the product is recycled in
accordance with local legal
requirements.
The low voltage cable must not be
shortened, extended or spliced.
Do not use a trimmer nearby the low
voltage cable. Be careful when
trimming edges where the cables are
placed.
1411 - 001 - 18.12.2019

1.4 Symbols on the display

The schedule function controls when
the product cuts the lawn.
The settings function is where the
general settings for the products are
set.
The product will not cut the grass due
to the schedule function.
The product overrides the schedule
function.
The battery indicator shows the charge
level of the battery. When the product
charges the symbol flashes.
The product is put in the charging
station but do not charge the battery.
The product is set in ECO-mode.

1.5 Symbols on the battery

Read the user instructions.
Do not discard the battery into fire and
do not expose the battery to a heat
source.
Do not immerse the battery into water.

1.6 General manual instructions

The following system is used in the Operator's
Manual to make it easier to use:
Introduction - 5