Changing a DOS
name
Change name
Select
Change name
DOS1 _ _ _ _ _ _ _ _ _ _ _
a
P OK #
The current name is shown on the second line of the display. This can
be changed using the options shown in the bottom line.
DOS is a set part of the name and cannot be changed.
The top line shows which option has been selected.
Use the arrow buttons (move left) and (move right) to move the
cursor to the desired option.
Confirm each option individually with the OK button.
The following options are available:
A - Z
– Letters from
each new word will start with a capital letter.
0 - 9
– Numbers from
– Space characters
– Use the symbol to delete the last position in the name displayed.
OK
– Select
to save the name.
– If you do not want to save the name you have entered, press the
symbol.
and confirm your entry with the OK button.
ä b c
;
Additional settings
83