Rf Tuning - iDTRONIC BLUEBOX ADVANT UHF Manual

Save Object
Sub-Index
Description
Data Type
Access
PDO Mapping
Value Range
Default Value
Save Object
This section provides details on the configurable dynamic power management
parameters of the
Only items 5227U with hardware version 2 and firmware version
2.xx integrates the reconfigurable RF carrier leakage canceler
feature and support RF tuning configuration parameters!
The dynamic power management parameters are managed through the OD
2204h.
Value Definition:
Sub-index 00h contains the number of valid object entries within the record. The
number of valid objects entries shall be the number of the general configuration
parameters. Its value is 04h.
Sub-index 01h to 04h contains a configuration parameter. An attempt to change
the value of the configuration parameter to any not supported value shall be
responded with the SDO abort transfer service (abort code: 06090030h). See
the BLUEBOX user manual for value definition details.
Parameter
Max Tune The maximum runtime RF tune steps. 0 to disable
Steps the runtime RF tuning.
B5U033000E
Yes
03h
Time step
UNSIGNED8
RW
No
See value definition
05h
Yes

3.2.4 RF Tuning

BLUEBOX
Description Range Default
0 ... 250 15
Page 33 of 54