iDTRONIC BLUEBOX ADVANT UHF Manual page 19

Access
PDO Mapping
Value Range
Default Value
Save Object
The EPC C1G2 (Class-1 Generation-2) parameters are managed through the OD
2202h.
Value Definition:
Sub-index 00h contains the number of valid object entries within the record. The
number of valid objects entries shall be the number of the general configuration
parameters. Its value is 13h.
Sub-index 01h to 13h contains a configuration parameter. An attempt to change
the value of the configuration parameter to any not supported value shall be
responded with the SDO abort transfer service (abort code: 06090030h). See
the BLUEBOX user manual for value definition details.
Parameter Description
Inventory How the reader does an inventory in 'continuous'
Mode mode.
R->T Link R->T Link Frequency as defined in EPC Class 1
Frequency Generation 2 protocol.
R->T Bit R->T Bit coding as defined in EPC Class 1
Coding Geneneration 2 protocol.
The Q selection algorithm used for setting the slot-
Q Selection
counter parameter as defined in EPC Class 1
Algorithm
Generation 2 protocol.
The Q value used in fixed Q selection algorithm or
the starting Q value used in dynamic Q selection
Q Value
algorithm as defined in EPC Class 1 Generation 2
protocol.
B5U033000E
RW
No
See value definition
00h
Yes
Range Default
Fast Multi Tag
Fast Single
Tag
Standard Multi
Standard Multi
Tag
Standard
Single Tag
40 kHz
160 kHz
256 kHz 160 kHz
320 kHz
640 kHz
FM0
Miller 2
Miller 2
Miller 4
Miller 8
Dynamic
Dynamic
Fixed
0 ... 15
Page 19 of 54
Tag
3