Sub-index 01h to 02h contains a configuration parameter. An attempt to change
the value of the configuration parameter to any not supported value shall be
responded with the SDO abort transfer service (abort code: 06090030h). See
the
BLUEBOX
user manual for value definition details.
Parameter
Description
Reading and tag queue management filter time.
Filter Time
with 1 second.
Reading
To add the reading antenna information in the
Antenna
tag's code.
Information
Transponder
To add the transponder type information in the
Type
tag's code.
Information
'Continuous'
'Continuous' mode.
Mode
Sub-Index
Parameter
01h
Filter Time
Functional
02h
Object Descritpion:
Index
Name
Object Code
Data Type
Entry Description:
B5U033000E
Note that 0 setting is internally overwritten
Description
Reading and tag queue management filter time (0 setting is
internally overwritten with 1 second):
•
Decimal 0 ... 99 for time in seconds (0 ... 99 seconds);
•
Decimal 100 ... 199 for time in minutes (0 ... 99 minutes).
Functional flags. Single bits are dedicated to disable (0 value) or
enable (1 value) functions:
•
Bit 7: Not used;
•
Bit 6: Not used;
•
Bit 5: Reading antenna information in tag's code;
Flags
•
Bit 4: Transponder type information in tag's code;
•
Bit 3: Not used;
•
Bit 2: Not used;
•
Bit 1: Not used;
•
Bit 0: 'Continuous' mode (0=enabled, 1=disabled).
2200h
General configuration
RECORD
General configuration record
Range
Default
0 ... 99 sec
1 sec
0 ... 99 min
Disabled
Disabled
Enabled
Disabled
Disabled
Enabled
Disabled
Enabled
Enabled
Page 11 of 54