iDTRONIC BLUEBOX ADVANT UHF Manual page 21

Parameter Description
Standard Single/Multi Tag with Custom Info). In
case of Reserved or User bank selected 0 means
no tag's memory block access, in case of TID bank
selected 0 means auto-length (class identifier,
manufacturer identifier, serial number).
only after a reboot of the reader.
The tag's info (PC, EPC, CRC) to include in the
tag's ID in ReadAfterDetect mode (Inventory
Mode = Standard Single/Multi Tag with Custom
ReadAfterDete
Info).
ct Info Flags
only after a reboot of the reader.
To enable/disable the AFI (Application Family
Use AFI
Identifier) management.
AFI The AFI (Application Family Identifier) value.
Sub-Index Parameter
Inventory
01h
B5U033000E
Note that this parameter become effective
Note that this parameter become effective
Description
A byte whose bits are dedicated to manage the inventory mode, the
search mode and the ReadAfterDetect info activation parameters:
• Bit 7:
• Bit 6:
'continuous' mode):
• Bit 5:
defined in ReadAfterDetect Password, Bank, Address, Length
and EPC Info parameters (0b=OFF, 1b=ON).
• Bit 4:
(0b=OFF, 1b=ON).
• Bit 3 ... bit 0:
Mode
inventory in 'continuous' mode):
Not used.
Search mode (how the reader singulates tags in
0b: Dual Target (the reader singulates tags in both
o
A and B states).
1b: Single Target (the reader singulates only tags
o
that are in A state).
Activation of the ReadAfterDetect with custom info as
Activation of the ReadAfterDetect with auto TID info
Inventory mode (how the reader does an
0x0: Fast Multi Tag: Inventory mode that does not
o
take the tag to the Opened but to the Acknowledged
state. This inventory mode is not as secure as the
standard mode, but it is faster.
0x1: Fast Single Tag: The same inventory mode like
o
the Fast Multi Tag, but with the slot count of 1. This
has the effect that no anticollision procedure is
performed.
0x2: Standard Multi Tag: Inventory mode like
o
defined in the EPC C1G2 standard.
0x4: Standard Single Tag: The same inventory mode
o
like the Standard Multi Tag, but with the slot count
of 1. This has the effect that no anticollision
procedure is performed.
Range Default
PC, EPC, CRC PC, EPC, CRC
Disabled
Disabled
Enabled
0 ... 255
Page 21 of 54
0