Chapter 3, Site Preparation; Power Source; Equipment Rack Location; Equipment Inspection - Harris Constellation Installation And Maintenance Manual

Power Source

DC power source, 20 V to 60 V.

Equipment Rack Location

The equipment rack should be located in a sheltered area that provides proper
lighting, ventilation, and access to both the front and back of the Constellation
radio.
At least 3 feet of space must be between the equipment, strong magnetic fields,
and sources of impulse noise.

Equipment Inspection

Verify that the correct radio system is going to be installed.
• Each Constellation radio has been set up at the factory according to the
customer's specifications. To configure a radio for a different
application, contact the Harris MCD Technical Assistance Center
(TAC). See
• The Constellation radio is shipped fully assembled and ready to install.
Harris Corporation
S
ITE
page 1.
3
C
H A P T E R
P
REPARATION
Constellation™