Using A Cartridge-Type Cleaner - Allied Telesis AT-FS201 Installation Manual

Bridging media converters
Hide thumbs Also See for AT-FS201:
Table of Contents

Advertisement

Appendix B: Cleaning Fiber Optic Connectors
This appendix provides the following procedures:
"Using a Cartridge-Type Cleaner" on page 42
"Using a Swab" on page 44

Using a Cartridge-Type Cleaner

Fiber optic cartridge cleaners are available from many vendors and are
typically called "cartridge cleaners," as shown inFigure 24.
Note
Do not use compressed air or aerosol air to clean a fiber optic
connector.
To clean a fiber optic connector using a cartridge cleaner, perform the
following procedure.
1. With one hand, hold the cartridge cleaner and push the lever on the
cleaning cartridge in the direction of the arrow to expose the cleaning
surface, as shown in Figure 25.
42
Figure 24. Cartridge Cleaner
100

Advertisement

Table of Contents
loading

This manual is also suitable for:

At-fs202At-fs202sc/fs1

Table of Contents