Edge Trimmer -725/04 For Pfaff 1591 - Pfaff 1571 Instruction Manual

Operating Controls
7

Edge trimmer -725/04 for PFAFF 1591

.10
Switching on the knife drive:
 Swivel the lever 1 backwards; the knife moves to the operating position.
Switching off the knife drive:
 Press the lever 1; the knife swivels away backwards.
Switching on the edge guide:
 Swing in the edge guide 2 by hand and press the lever 3; the edge guide 2 moves to the
Switching off the edge guide:
 Raise the edge guide 2 and allow it to engage; the edge guide 2 is out of operation.
 Raise the lever 4; the edge guide swivels away backwards.
Replacing knives:
 Switch the machine off.
 Release the screw 5 and remove the knife 6.
 Insert a new knife and slide it fully towards the needle plate insert 7.
 Gently tighten the screw 5.
 Adjust the knife as described in chapter 15.05.07 Knife position of the adjustment
22
3
2
Fig. 7 - 10
Do not reach into the knife during operation! Risk of injury!
operating position.
The work described below may only be carried out by technical staff or people
with appropriate training!
manual and tighten the screw 5.
4
1
5
7 6