Lever For Lifting The Roller Presser; Edge Trimmer -725/04 - Pfaff 1491E1 Instruction Manual

7

Lever for lifting the roller presser

.05
Fig. 7 - 06
7.

Edge trimmer -725/04

06
3
Fig. 7 - 07
Switching off the edge guide
The edge guide is put out of operation by raising it until it engages.
The edge guide swings to the rear when lever 4 is raised.
1
4
2
Do not reach into the area of the working knife. Danger of injury!
The roller presser is raised by turning
lever 1.
Switching on the edge trimmer
The knife is brought into start position
and the edge trimmer is switched on by
pushing lever 1 to the rear until it
engages.
Switching off the edge trimmer
The edge trimmer is switched off and
the knife is swung to the rear by
pressing lever 1.
Switching on the edge guide
The edge guide is brought to starting
1
position by swinging in the edge guide 2
and pressing lever 3.
Controls
7 - 3