7
Edge trimmer -725/04 for PFAFF 1571
.09
Fig. 7 - 09
Replacing knives:
Switch the machine off.
Release the screw 5 and remove the knife 6.
Insert a new knife and gently tighten the screw 5.
Adjust the knife as described in chapter 15.05.05 Knife movement of the adjustment
manual and tighten the screw 5.
3
4
2
5
The work described below may only be carried out by technical staff or people
with appropriate training!
Switching on the knife drive:
6
Swivel the lever 1 backwards; the knife
moves to the operating position.
Switching off the knife drive:
Press the lever 1; the knife swivels away
backwards.
Switching on the edge guide:
Swing in the edge guide 2 by hand and
press the lever 3; the edge guide 2
moves to the operating position.
Switching off the edge guide:
1
Raise the edge guide 2 and allow it
to engage; the edge guide 2 is out of
operation.
Raise the lever 4; the edge guide swivels
away backwards.
Operating Controls
Do not reach into the knife
during operation! Risk of injury!
21