Edge Trimmer -725/04 For 1591 - Pfaff 1571 Instruction Manual

7.

Edge trimmer -725/04 for 1591

10
3
Fig. 7 - 10
Switch on knife drive:
Move lever 1 backwards. The knife moves into operating position.
Switch off knife drive:
Press lever 1. The knife swings backwards.
Switch on edge guide:
Swing edge guide 2 into position by hand and press lever 3. The edge guide 2 moves into
its operating position.
Switch off edge guide:
Raise edge guide 2 and let it click into position. The edge guide 2 is out of operation.
Raise lever 4. The edge guide swings backwards.
Changing the knife:
Switch off the machine.
Loosen screw 5 and remove knife 6.
Insert new knife and push it close to needle plate insert 7.
Slightly tighten screw 5.
Adjust the knife according to Chaper 1.05.07 Knife position
and tighten screw 5.
4
2
Keep your hands away from the moving knife! Danger of injury!
The following work may only be carried out by technical staff or by persons who
have been properly instructed.
1
Controls
6
7
5
in the adjustment manual
21