Edge Trimmer -725/04 For Pfaff 1574 And 1591 - Pfaff 1571 Instruction Manual

Controls
7.

Edge trimmer -725/04 for PFAFF 1574 and 1591

10
Switch on knife drive:
Switch off knife drive:
Switch on edge guide:
Switch off edge guide:
Changing the knife:
7 - 6
3
2
Fig. 7 - 10
Keep your hands away from the moving knife! Danger of injury!
Move lever 1 backwards. The knife moves into operating position.
Press lever 1. The knife swings backwards.
Swing edge guide 2 into position by hand and press lever 3. The edge guide 2 moves into
its operating position.
Raise edge guide 2 and let it click into position. The edge guide 2 is out of operation.
Raise lever 4. The edge guide swings backwards.
The following work may only be carried out by technical staff or by persons who
have been properly instructed.
Switch off the machine.
Loosen screw 5 and remove knife 6.
Insert new knife and push it close to needle plate insert 7.
Slightly tighten screw 5.
Adjust the knife according to Chaper 13.05.07 Knife position and tighten screw 5.
4
1
6
7 5