Edge Trimmer -725/04 For Pfaff 1571 - Pfaff 1571 Instruction Manual

Operating Controls
7

Edge trimmer -725/04 for PFAFF 1571

.09
Replacing knives:
 Switch the machine off.
 Release the screw 5 and remove the knife 6.
 Insert a new knife and gently tighten the screw 5.
 Adjust the knife as described in chapter 15.05.05 Knife movement of the adjustment
22
3
Fig. 7 - 09
The work described below may only be carried out by technical staff or people
with appropriate training!
manual and tighten the screw 5.
4
2
Switching on the knife drive:
6
 Swivel the lever 1 backwards; the knife
5
Switching off the knife drive:
 Press the lever 1; the knife swivels away
Switching on the edge guide:
 Swing in the edge guide 2 by hand and
Switching off the edge guide:
1
 Raise the edge guide 2 and allow it
 Raise the lever 4; the edge guide swivels
Do not reach into the knife
during operation! Risk of injury!
moves to the operating position.
backwards.
press the lever 3; the edge guide 2
moves to the operating position.
to engage; the edge guide 2 is out of
operation.
away backwards.