Razberi V8 Core Manual And Getting Started Manual page 66

6. Routing the Cables
NOTE: If you did not order the optional CMA, use the two hook and loop straps provided in
the rail kit to route the cables at the back of your system.
Locate the outer CMA brackets on the interior sides of both rack flanges (1). Bundle the
cables gently, pulling them clear of the system connectors to the left and right sides (2).
Thread the hook and loop straps through the tooled slots on the outer CMA brackets on
each side of the system to secure the cable bundles (3).
Figure 58. Routing the Cables
Rack Mounting Instructions 65