Table of Contents
Advertisement
2. Installing and Removing Tooled Rails (Threaded Hole Racks)
Remove the pins from the front and rear mounting brackets using a flat-tipped screwdriver
(1). Pull and rotate the rail latch subassemblies to remove them from the mounting
brackets (2). Attach the left and right mounting rails to the front vertical rack flanges using
two pairs of screws (3). Slide the left and right back brackets forward against the rear
vertical rack flanges and attach them using two pairs of screws (4).
Figure 54. Installing and Removing Tooled Rails
Rack Mounting Instructions
61
Advertisement
Table of Contents
