Razberi V8 Core Manual And Getting Started Manual page 109

1. Turn on the server, during boot sequence press F2 (System Setup)
2. Select iDRAC Settings
Figure 90. iDRAC Settings
3. Select Network
Figure 91. iDRAC Network Settings
4. Ensure Enable NIC is enabled
5. NIC Selection: Dedicated uses the dedicated network interface, Shared LOM 1, 2 will
share the NIC of the motherboard. (See the rear-view section in the Overview section of
this manual for NIC locations)
iDRAC Initial Setup
iDRAC Express and Enterprise 108