Razberi V8 Core Manual And Getting Started Manual page 48

The LEDs on the drive carrier indicates the state of each drive. Each drive carrier in your
system has two LEDs: an activity LED (green) and a status LED (bicolor, green/amber). The
activity LED flashes whenever the drive is accessed.
Figure 44. Drive Carrier Layout
1. Drive activity LED indicator
2. Drive status LED indicator
3. Drive capacity label
NOTE: If the drive is in the Advanced Host Controller Interface (AHCI) mode, the status LED
indicator does not turn on.
Drive indicator codes
Drive status indicator code
Flashes green, amber, and then turns
off Flashes amber four times per
second Flashes green slowly
Solid green
Each NIC on the back of the system has indicators that provide information about the
activity and link status. The activity LED indicator indicates if data is flowing through the
NIC, and the link LED indicator indicates the speed of the connected network.
Drive Indicator Codes
Identifying drive or preparing for removal.
Drive ready for removal.
NOTE:
are initialized after the system is turned on. Drives are not
Drive failed.
Drive online.
NIC Indicator Codes
The drive status indicator remains off until all drives
M4 Overview 47