Drive status indicator code
Off
Flashes green, amber, and then turns off
Flashes amber four times per second
Flashes green slowly
Solid green
Flashes green for three seconds, amber for
three seconds, and then turns off after six
seconds
Each NIC on the back of the system has indicators that provide information about the
activity and link status. The activity LED indicator indicates if data is flowing through the
NIC, and the link LED indicator indicates the speed of the connected network.
Figure 35. NIC Indicator Diagram
NIC indicator codes
1. Link LED indicator
2. Activity LED indicator
Table 27. NIC Indicator Diagram
Status
Link and activity indicators are off
Link indicator is green and activity indicator is
blinking green
Link indicator is amber and activity indicator
is blinking green
Link indicator is green and activity indicator is
off
Condition
Drive ready for removal.
NOTE:
The drive status indicator remains off until all
drives are initialized after the system is turned on. Drives
are not ready for removal during this time.
Predicted drive failure.
Drive failed.
Drive rebuilding.
Drive online.
Rebuild stopped
NIC Indicator Codes
Condition
The NIC is not connected to the network.
The NIC is connected to a valid network at its maximum
port speed and data is being sent or received.
The NIC is connected to a valid network at less than its
maximum port speed and data is being sent or received.
The NIC is connected to a valid network at its maximum
port speed and data is not being sent or received.
A8 Overview
39