Razberi V8 Core Manual And Getting Started Manual page 63

3. Installing the System in a Rack
Pull the inner slide rails out of the rack until they lock into place (1). Locate the rear rail
standoff on each side of the system and lower them into the rear J-slots on the slide
assemblies (2). Rotate the system downward until all the rail standoffs are seated in the J-
slots (3). Push the system inward until the lock levers click into place.
Press the slide-release lock buttons on both rails and slide the system into the rack (4).
Figure 55. Installing the System in a Rack
Rack Mounting Instructions 62