Razberi V8 Core Manual And Getting Started Manual page 65

5. Engaging and Releasing the Slam Latch
NOTE: For systems not equipped with slam latches, secure the system using screws, as
described in step 3 of this procedure.
Facing the front, locate the slam latch on either side of the system (1). The latches engage
automatically as the system is pushed into the rack and are released by pulling up on the
latches (2). To secure the system for shipment in the rack or other unstable environments,
locate the hard-mount screw under each latch and tighten each screw with a #2 Phillips
screwdriver (3).
Figure 57. Engaging and Releasing the Slam Latch
Rack Mounting Instructions 64