Razberi V8 Core Manual And Getting Started Manual page 110

6. Set the IPV4 or IPV6 network settings, depending on the local configuration (Static or
DHCP)
Figure 92.iDRAC IP Settings
7. Click Back, Click Finish, and then click Yes. The network information is saved, and the
system reboots.
iDRAC configuration is now completed. The iDRAC Web User Interface can now be reached
with any supported browser (Chrome, IE, Firefox, Safari).
1. Open a browser and type the IP address that you configured for iDRAC. If using
DHCP, you can identify the DHCP address within the Server Administrator
application. On the desktop, click the Server Administrator icon and log in. The
Server Administrator uses windows authentication.
a. Once logged in, click on Main System Chassis in the left-hand menu
b. Click on Remote Access
c. Within this screen, you will see the IP address in the lower section. This is the
IP to use to browse to the iDRAC Web Interface Application
2. Login Screen
Logging into iDRAC
iDRAC Express and Enterprise 109