Advertisement
Item Description
Components, parts and materials containing
refractory ceramic fibers
Components, parts and materials containing
radioactive substances
2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where components
and materials requiring selective treatment can be removed.
Tool Description
Electric Screwdriver
Buttoning Tool
Description #3
Description #4
Description #5
3.0 Product Disassembly Process
3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:
1.
Use electric screwdriver to remove the 4 screws on the chassis.
2.
Remove the top cover.
3.
Use electric screwdriver to remove the 12 screws on the antenna plate and the PCBA.
4.
Use buttoning tool to separete the antennas and PCBA.
5.
Separate the antenna palte and PCBA.
6.
7.
8.
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items
contained in the product that require selective treatment (with descriptions and arrows identifying locations).
MF877-00
Template Revision A
Notes
Page 2
HPE instructions for this template are available at
Tool Size (if
applicable)
MF877-01
Quantity
of items
included
in product
0
0
T8
Advertisement
