DediProg NuProg-E User Manual page 42

Value Descriptions:

File Format: The format of the programming file.

File Checksum: The file checksum's calculation method.

File Offset: Appoint an address to start loading the buffer.

File Path: Assign the path for the programming file.

Skip Blank Value: Enable this function to analyze and skip the blank data
before programming, which will write more efficiently and reduce the
programming time.

Partition Name: It depends on the partitioned sections.
 Note: This partition here will only show the amounts and settings
according to the IC that has been detected.

Sector Index: Set up the sector starting point

Sector Count: Set up total programming sectors.

AutoSetFileOffset: When set up the Sector Index, this function can
automatically calculate the File Offset.

+: When there is more than one programming file, please press "+" to add the
files to the data list.

Show Images and Hide Images: Open and close the data list.

Copy: Choose the created Project folder, and then copy the whole project into the
current IC. This project folder can support from Scan or Save Prj.

Scan: Scan the current IC and save IC data into local file folder.
www.dediprog.com
NuProg-E User Manual
42