Table of Contents
Advertisement
Example 4
Duplicate the bootable master IC to other blank IC through Auto Batch
programming.
Step 1. First, insert a master IC. Once the IC has been detected, save the contents of
Descriptor/Attributes/Flags/LUN of the master IC.
Enter Config window, and then save values from the Descriptors, the Attributes,
and the Flags (For next time usage).
Use Save Memory in the read IC to save the LUN.
Step 2. Load the images that were saved in the LUN.
Step 3. The batch setting in the Config window should be Write Descriptor > Program >
Checksum Verify
If Write Attributes and Write Flags are required, then add it behind Checksum verify.
www.dediprog.com
Descriptors
NuProg-E User Manual
Attributes/Flags
Fig. 5-46
Fig. 5-47
35
Advertisement
Table of Contents
