DediProg NuProg-E User Manual page 22


Flags: Set up the settings and write through the Write Flag; test read is also
available on this page.
Export/Save/Load/Refresh
Change the settings according to your needs, and then write through the Write Flag.
Refresh the flags and ensure it is written correctly. Save the values for next time usage.
※Some flag values are read-only and some can read and write, the values that you can
change are the ones that are able to write.
Note: Some flag values are one time programming, which cannot change once it is
written. Please refer to the UFS datasheet that you use before changing any settings.
www.dediprog.com
Fig. 5-21
NuProg-E User Manual
22