Value Descriptions:
File Format: The format of the programming file.
File Checksum: The file checksum's calculation method.
File Offset: Appoint an address to start loading the buffer.
File Path: Assign a path for the programming file.
Skip Blank Value: Enable this function to analyze and skip the blank data
before programming, which will write more efficiently and reduce the
programming time.
Partition Name: It depends on the partitioned sections.
Note: This partition here will only show the amounts and settings according to
the IC that has been detected.
Sector Index: Set up the sector starting point
Sector Count: Set up total programming sectors.
AutoSetFileOffset: When setting the Sector Index, this function can
automatically calculate the File Offset.
+: When there is more than one programming file, please press "+" to add the
files to the data list.
Show Images and Hide Images: Open and close the data list.
Copy: Choose the created Project folder, and then copy the whole project into the
current IC. This project folder can support from Scan or Save Prj.
Scan: Scan the current IC and save IC data into local file folder.
www.dediprog.com
NuProg-E User Manual
17