Table of Contents
Advertisement
[CHORUS I] button
[CHORUS II] button
[DELAY] button
[MANUAL] button
[60/106] switch
EXT CLK IN jack
select and then press another bank button to select it.
2. Press the PATCH [1]–[8] buttons to switch the patch.
To store the patch
* When you edit a patch, a dot appears in the display. 1-1.
1. Press the save-destination BANK [1 (5)]–[4 (8)] button. Each time you press
the same bank button, you alternate between banks 1–4 and 5–8.
To select banks 5–8, you can also hold down the bank (5–8) that you want to
select and then press another bank button to select it.
2. Long-press the save-destination PATCH [1]–[8] button.
Turns the chorus effect- I/II On/Off.
Turns the delay effect On/Off.
Causes sound to be produced according to the current settings of the sliders.
Switches between JUNO-60 sounds and JUNO-106 sounds.
Inputs a clock signal from an external device. You can make the sequencer's
steps advance in synchronization with the clock (pulse) that is input.
Hide quick links:
Advertisement
Table of Contents
