Table of Contents
Advertisement
Chapter 1
LED
Status
(5GHz
Wireless)
(LAN)
Green On
Orange On
(Internet)
1 2 2
The Back Panel
The following parts (view from left to right) are located on the back panel.
Button and Port Explanation
Item
Power Port
WAN Port
LAN Ports (1/2/3/4)
WPS/RESET Button
Antennas
On
The 5GHz wireless band is enabled.
Off
The 5GHz wireless band is disabled.
At least one powered-on device is connected to the router's LAN
On
port.
Off
No powered-on device is connected to the router's LAN port.
Router Mode: Internet is available.
Access Point Mode: The WAN port is connected.
Range Extender Mode: The router is connected to the host network.
The WAN port is connected, but internet is not available.
Router Mode: The WAN port is not connected.
Access Point Mode: The WAN port is not connected.
Off
Range Extender Mode: The router is not connected to the host
network.
For connecting the router to a power socket via the provided power adapter.
For connecting to a DSL/Cable modem, or an Ethernet jack.
For connecting your PC or other wired devices to the router.
Press the button for 1 second, and immediately press the WPS button on
your client to start the WPS process.
Press and hold the button until all LEDs turn off to reset the router to its
factory default settings.
Used for wireless operation and data transmit. Upright them for the best
Wi-Fi performance.
Get to Know About Your Router
Indication
Description
5
Hide quick links:
Advertisement
Table of Contents
