TP-Link Archer C24 User Manual page 43

Chapter 4
1 Set your PC to a static IP address, for example 192.168.0.100.
2 Visit http://tplinkwifi.net, and log in with the password you set for the router.
3 Go to Advanced
4 Click Add.
5 Click VIEW COMMON SERVICES
and Protocol will be automatically filled in.
6 Click VIEW CONNECTED DEVICES
Address will be automatically filled in. Or enter the PC's IP address 192.168.0.100
manually in the Device IP Address
7 Click SAVE.
Note:
• It is recommended to keep the default settings of
which port and protocol to use.
• If the service you want to use is not in the
parameters manually. You should verify the port number that the service needs.
• You can add multiple virtual server rules if you want to provide several services in a router. Please note
that the External Port
Done!
Users on the internet can enter
to visit your personal website.
Note:
• If you have changed the default
website.
• The WAN IP should be a public IP address. For the WAN IP is assigned dynamically by the ISP, it is
recommended to apply and register a domain name for the WAN referring to
users on the internet can use
> NAT Forwarding >
and select HTTP. The
and select your home PC. The
field.
Common Services
should not be overlapped.
http:// WAN IP
External Port, you should use
http:// domain name
Configure the Router in Wireless Router Mode
Port Forwarding.
External
Internal Port and Protocol
list, you can enter the corresponding
(in this example: http:// 218.18.232.154)
http:// WAN IP: External Port
to visit the website.
Port, Internal Port
Device IP
if you are not clear about
to visit the
Dynamic DNS. Then
39