Table of Contents
Advertisement
Chapter 5
•
To set System Time:
1. Select the way in which the router gets its time: Get from Internet, Get from Managing
Device, Manually.
2. Select your local
Time
3. Enter the address or domain of the
4. Click SAVE.
•
To set up Daylight Saving Time:
1. Select
Enable Daylight
2. Select the start time from the drop-down list in the
3. Select the end time from the drop-down list in the
4. Click SAVE.
Note:
This setting will be used for some time-based functions such as firewall. You must specify your time zone once you log
in to the router successfully; otherwise, time-based functions will not take effect.
Zone.
NTP Server 1
Saving.
Configure the Router in Access Point Mode
or
NTP Server
2.
Start
fields.
End
fields.
72
Hide quick links:
Advertisement
Table of Contents
