Table of Contents
Advertisement
Chapter 6
1. Select the way in which the router gets its time: Get from Internet, Get from Managing
Device, Manually.
2. Select your local
Time
3. Enter the address or domain of the
4. Click SAVE.
•
To set up Daylight Saving Time:
1. Select
Enable Daylight
2. Select the start time from the drop-down list in the
3. Select the end time from the drop-down list in the
4. Click SAVE.
Note:
This setting will be used for some time-based functions such as firewall. You must specify your time zone once you log
in to the router successfully; otherwise, time-based functions will not take effect.
6 7
Reboot
Some settings of the router will take effect only after rebooting, and the system will
reboot automatically. You can also reboot the router to clear cache and enhance running
performance.
1. Visit http://tplinkwifi.net, and log in with the password you set for the router.
2. Go to
System
> Reboot, and you can restart your router.
•
To reboot the router manually:
Click REBOOT, and wait a few minutes for the router to reboot.
Zone.
NTP Server 1
Saving.
Configure the Router in Range Extender Mode
or
NTP Server
2.
Start
fields.
End
fields.
81
Hide quick links:
Advertisement
Table of Contents
