Wps - TP-Link Archer C24 User Manual

Chapter 4
4 3 4

WPS

WPS (Wi-Fi Protected Setup) can help you to quickly and securely connect to a network.
This section will guide you to add a new wireless device to your router's network quickly
via WPS.
Note:
The WPS function cannot be configured if the wireless function of the router is disabled. Please make sure the wireless
function is enabled before configuration.
1. Visit http://tplinkwifi.net, and log in with the password you set for the router.
2. Go to Advanced >
3. Follow one of the following three methods to connect your client device to the
router's Wi-Fi network.
Method 1: Using a PIN
• Connects vis the Client's PIN
1. Keep the WPS Status as
2. Enter the PIN of your device and click CONNECT. Then your device will get connected
to the router.
Wireless > WPS.
Enabled and select
Configure the Router in Wireless Router Mode
Client's PIN.
35