Table of Contents
Advertisement
Installation, Operation and Maintenance Manual
VCIOM-15792-EN Rev. 0
5.3
Dismantling and Demolition
!
Before disassembling the actuator it is necessary to close the pneumatic supply line and
discharge pressure from the cylinder of the actuator, from the control unit and from the
accumulator tank, if present. The demolition of the actuator both concerning any electrical
and mechanical parts should be made by specialized staff.
Before starting the disassembly a large area should be created around the actuator so to
allow any kind of movement without problems of further risks created by worksite.
Separate the parts composing the actuator according to their nature (ex. metallic, and
plastic materials, fluids etc.) and send them to differentiated waste collection sites, as
provided for by the laws and provisions in force.
Maintenance
WARNING
Section 5: Maintenance
October 2020
33
Advertisement
Table of Contents
