Quick Access To Emissivity / Signal Smoothing / Operating Mode; I/O Signal Configuration - Keller ITS CellaPort PT 11 Series Operating Manual

Operating manual PT 11x, 12x,13x
L1 linearization .......... off
L1 filter ........... automatic
L1 memory type double
L1 memory filter .......... off
C: [CONFIG EPSILON TABLE]
E: Epsilon
T: Transmission
B: Background-Compensation
L: [LINEARIZATION]
F: Filter
M: [MEMORY]
P: Show parameter
Q: Show calibration data
X: Show L1 temperature
Y: Show L1 premax temperature
ESC: Back to MAIN-MENU
------------------------------------------------------------------
>LAMBDA 1 >
17.3.2 Quick access to emissivity / signal smoothing / operating
mode
Use keys "E", "A" and "T" to access and change the emissivity setting,
smoothing filter and measuring mode.

17.3.3 I/O Signal Configuration

Press „C" to access and adjust all settings regarding LED and buzzer.
------------------------------------------------------------------
Submenu I/O
------------------------------------------------------------------
C: [STATUS LED CONTROL]
D: [BUZZER CONTROL]
M: [OPTIONS]
ESC: Back to MAIN-MENU
------------------------------------------------------------------
>I/O >
The LED and buzzer configuration are grouped in submenus where each
can be accessed for further configuration.
LED control:
------------------------------------------------------------------
Submenu CONTROL LED
------------------------------------------------------------------
GRN.LED source .... ATD tAct L1
GRN.LED function
GRN.LED delay time ...
GRN.LED hold time ....
S: Set source
F: Set function
D: Set delay time
O: Set hold time
ESC: Back to MAIN-MENU
------------------------------------------------------------------
>I/O >LED CONTROL >
2.00 s
level/signal
0.00 s
0.00 s
29