User Preset Setting Menu - Sony TRIMASTER PVM-X2400 Operating Instructions Manual

Ch. Status (For Single View: page 39, For Quad
View: page 40)
VPID/HDMI Status (For Single View: page 39,
For Quad View: page 40)
Unit Status (For Single View: page 39, For Quad
View: page 40)

User Preset Setting menu

All channel settings can be configured or
adjusted. You can also copy the setting values
from one channel to apply them to another.
Ch. Setting
The input signal and video settings can be
adjusted.
Submenu
Ch. No
Name
Input Select
VPID/HDMI Auto
21
Setting
Select the channel to be configured.
Sets the channel name.
Select the connector and signal from
the following.
 4K SDI Input1,2,3&4
4K SDI Input1&2

 4K SDI Input3&4
 4K SDI Input1
4K SDI Input3

 2K SDI Input1&2
 2K SDI Input3&4
 2K SDI Input1
 2K SDI Input2
 2K SDI Input3
 2K SDI Input4
 HDMI
 On: "RGB/YCC Range," "EOTF,"
"Color Space," and "Transfer
Matrix" are automatically set as
appropriate based on the
Payload ID (VPID) signal
information when the SDI signal
is input, and set as appropriate
based on the HDMI InfoFrame
signal information when the
HDMI signal is input.
 Off: The values set for "RGB/YCC
Range," "EOTF," "Color Space,"
and "Transfer Matrix" are used.