Monitoring Tool Menu - Sony TRIMASTER PVM-X2400 Operating Instructions Manual

Monitoring Tool menu

The monitoring function for the input video
signal and recording assistance function are
configured.
Scopes
Submenu Setting
Display
WFM Sets whether to display WFM (Wave
Form Monitor). Select "On" to display
the waveform.
Signal level (%)
Waveform
Type of the waveform
1) The signal tone is displayed when EOTF is set to 2.2, 2.4,
2.6, or 2.4(HDR). The brightness value of the input signal is
displayed when EOTF is set to SMPTE ST 2084. When EOTF
is set to ITU-R BT.2100(HLG), the brightness value of the
input signal when the maximum brightness of the monitor
2
is 1000 cd/m is displayed. When EOTF is set to S-Log3 or S-
Log3(Live HDR), the brightness value when the S-Log3
signal is displayed in HDR(Live) is displayed.
Signal tone or
1)
brightness value
Submenu
Vector
Yellow
Black
Green
Color target frame (The outer frame
indicates 100 %, and the inner frame
indicates 75 %.)
ALM
Audio level
9 10 11 12 13 14 15 16
Channel number
(The eight channels are displayed, including the
channel which is selected. The selected channels
are displayed in light blue.)
29
Setting
Sets whether to display Vector (vector
scope). Select "On" to display the color
difference components of the video
signal as vectors.
Red Magenta
Cyan
Sets whether to display the audio level
meter. Selecting "On" displays the
eight audio level channels. The eight
channels set for "Left Audio" and
"Right Audio" in "Audio Preset" are
automatically set on the eight
channels displayed.
Blue