Performance Data; Spark Plugs; Fuel System; Brakes - Ducati HYPERMOTARD 939 Owner's Manual

Performance data

Maximum speed in any gear should be reached only
after a correct running-in period with the motorcycle
properly serviced at the recommended intervals.
Important
Failure to follow these instructions releases
Ducati Motor Holding S.p.A. from any liability
whatsoever for any engine damage or shorter engine
life.

Spark plugs

Make:
NGK
Type:
MAR9A-J

Fuel system

MARELLI indirect electronic injection.
Throttle body with full Ride by wire system, round
cross-section having a diameter of 52 mm.
Injectors per cylinder: 1.
Firing points per injector: 4.
Fuel supply: 95-98 RON.
Warning
The motorcycle is only compatible with fuel
having a maximum content of ethanol of 10% (E10).
Using fuel with ethanol content over 10% is
forbidden. Using it could result in severe damage to
the engine and motorcycle components. Using fuel
with ethanol content over 10% will make the
warranty null and void.

Brakes

Separate-action anti-lock braking system operated by
hall-type sensors mounted to each wheel with phonic
wheel detection: ABS can be disabled.
FRONT
Semi-floating twin-disc of 320 x 5 mm.
Braking material: stainless steel.
Carrier material: stainless steel, black colour.
Disc diameter: 320 x 4.5 mm.
Hydraulically operated by a control lever on handlebar
right-hand side.
Brake calliper make: BREMBO.
Type: M4.32 b.
Friction material: TT 2182 FF.
Master cylinder type: PS 16/22.
REAR
203