Ducati HYPERMOTARD 939 Owner's Manual page 107

Changing the PIN CODE
This function allows changing your own 4-digit PIN
CODE.
To display the function, enter the setting menu and
access the "PIN" page.
Note
If, when accessing this function, "INSERT NEW
PIN" and a string of dashes "- - -" are displayed,
function is not active as PIN CODE has never been
entered. Enter your PIN code with the "PIN enabling"
function.
When entering the function, the display shows
"MODIFY PIN CODE"; press button (1) or (2) to modify
the PIN.
Note
To change the PIN code, you must remember
the already stored PIN.
"OLD" and four dashes "- - - -" will appear on the
display; now enter the old 4-digit code previously
stored.
106
Entering the OLD PIN:
- Each time button (2) is pressed, the highlighted
number increases from 0 to 9 and then goes back
to 0; to confirm the desired number press button
(4);
- Repeat the procedure until entering the fourth
digit.
- Press button (4) again to confirm.
If the code is not correct, "ERROR" (wrong old code)
will appear for 3 seconds and then the instrument
panel will display "EXIT" again.
If code has been correctly entered, "CORRECT" will
appear on the display and the first dash where
entering the new 4-digit code will be displayed.