Ducati HYPERMOTARD 939 Owner's Manual page 115

(TEMPERATURE) setting
This function allows you to change the units of
measurement of the indications: Engine coolant
temperature and Air Temperature.
Once "TEMPERATURE" is selected, press button (4).
Then, the instrument panel will highlight the unit of
measurement currently in use.
Press button (1) or (2) to scroll among the available
units of measurement (°C and °F). Once the units of
measurements to be set have been selected, press
button (4) again.
The instrument panel automatically highlights
"MEMORY"; to actually memorise the new unit of
measurement, press button (4) for 3 seconds; then
the instrument panel will show "MEMORIZED" for 2
seconds to confirm the actual change.
"EXIT" will be automatically highlighted; press button
(4) to quit and go back to the setting menu.
°C: if this unit is set, the following values will have the
same units of measurement:
- Engine coolant temperature and T_AIR: °C
°F: if this unit is set, the following values will have the
same units of measurement:
114
- Engine coolant temperature and T_AIR: °F
Note
When the current settings are the default ones,
on the "DEFAULT" indication right side the display
shows a symbol (a circle with a dot).