Operation - Makita BV4500-118 Instruction Manual

Hook
CAUTION:
Always remove the battery when
hanging the tool with the hook.
CAUTION:
Never hook the tool at high loca-
tion or on potentially unstable surface.
CAUTION:
When hanging the tool with the
hook, hang it carefully.
1
2
3
Fig.10
1. 2. 3. Screw
housing on either side and then secure it with a screw.
Installing or removing the mandrel
container
For BV4500-118
NOTICE:
Be sure to install the mandrel container
or the cap to the tool before operating the tool. If
the mandrel container or the cap is not installed
to the tool, the tool will not operate.
Fig.11
1.
Fig.12
1
1.
NOTICE:
2
use the tool only for operations that do not break
3
off mandrel.
cause malfunction of the tool.

OPERATION

CAUTION:
to the moving parts while operating the tool.
NOTICE:
For BV2200-118
Use the tool only for operations that do not break
off mandrel.
cause malfunction of the tool.
Installing a blind rivet or lockbolt
(with breaking off a mandrel)
For BV4500-118
CAUTION:
becomes full, empty it regularly by removing the
mandrel container.
1
CAUTION:
lockbolt into the nose piece, be sure to switch
off the tool.
CAUTION:
off mandrel from high locations.
8 ENGLISH
When the cap is attached to the tool,
Never bring your hand or face
Before the mandrel container
When inserting a blind rivet or
Be careful not to drop the broken
1
-