Canon PC880 Operator's Manual page 49

Lift the main unit lever on the left side to open the main unit.
REQUEST:
Do not touch the roller, because doing so may adversely affect the quality of your
copy images.
NOTICE:
Make sure that the height of the paper stack does not exceed the height of the length
guide's claw in the cassette. Failure to do so will cause a paper jam.
NO
<Multi-stack Bypass (PC880) or Single-sheet
Bypass (PC860)>
Slowly remove any
jammed copy paper from
the copier.
<Cassette>
1. Open the right cover.
2. Slowly remove any
jammed paper behind the
right cover.
3. Close the right cover.
NOTICE:
When you close the right cover, make sure it is
closed completely.
Close the main unit by pressing down firmly on the part marked " ".
CAUTION:
When you close the main unit, be careful not to get your hand in the way.
To make copies as usual, turn the power switch ON and programme the copy settings again.
Can you see paper inside the copier?
Slowly remove any jammed copy paper from the
copier.
<If you cannot remove the jammed paper>
YES
Grip and pull up the fixing
assembly knob as shown
in the illustration, and
remove the jammed
paper.
TROUBLESHOOTING
Fixing Roller
Lever
assembly
49